IBM Support

PK61294: WITH DFHLOG LOG OF DUMMY IN CMAS EYUDREP FILE CAN NOT BE DEFINED AS A RECOVERABLE FILE

A fix is available

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as program error.

Error description

  • If DFHLOG log is defined as dummy in the CMAS then the EYUDREP
    file can not be a recoverable file.  If DFHLOG log is set up as
    a real log in the CMAS then EYUDREP file can be a recoverable
    file.
    

Local fix

Problem summary

  • ****************************************************************
    * USERS AFFECTED: All CICSPlex SM V3R2M0 Users                 *
    ****************************************************************
    * PROBLEM DESCRIPTION:    You observe resources missing from   *
    *                      the CMAS's data repository, and incon-  *
    *                      sistent BAS definitions stored in the   *
    *                      repository while DFHLOG in the CMAS     *
    *                      is defined as TYPE=DUMMY.               *
    ****************************************************************
    * RECOMMENDATION:    After applying the PTF that resolves this *
    *                 APAR, all CMASes and MASes must be recycled  *
    *                 to pick up the new code.  Note that the      *
    *                 restarts do not need to be done at the same  *
    *                 time.                                        *
    *                    Before starting a CICSPlex SM CMAS with   *
    *                 libraries containing the fix for this APAR,  *
    *                 you must insure that the DFHLOG JOURNALMODEL *
    *                 for the CMAS specifies TYPE(MVS). If the     *
    *                 DFHLOG JOURNALMODEL used by a CMAS does not  *
    *                 specify TYPE(MVS), the CMAS will terminate   *
    *                 after issuing message                        *
    *                 .                                            *
    *                   EYUXD0113E  Data Repository initialization *
    *                               failed.                        *
    *                 .                                            *
    *                 Either Coupling Facility or DASD-Only log    *
    *                 streams may be specified.                    *
    *                    Refer to CICS Transaction Server for z/OS *
    *                 Installation Guide, Version 3 Release 1      *
    *                 (GC34-6426-05), Chapter 25 "Defining the     *
    *                 logger environment for CICS journaling" for  *
    *                 information on how to define logstreams for  *
    *                 the CICS System Log.                         *
    ****************************************************************
       CPSM requires that the EYUDREP file be recoverable, so that
    incomplete changes can be backed out if a repository update
    fails or an exception occurs during processing associated with
    a repository update (for example, BAS Inconsistent Set or
    Inconsistent Scope checking).  Otherwise, the repository may
    be updated with invalid resources, or resources may be deleted
    without any audit trail.  At one time module EYU0XDIN (XDIN -
    Data Repository Initialization) checked to insure that DFHLOG
    was not associated with a dummy logstream, but this check was
    bypassed during development of a prior release of CPSM so that
    CMASes could run on processors which did not support the MVS
    logger.
    

Problem conclusion

  •    The check to insure that DFHLOG is not associated with a
    dummy logstream is restored.  In addition, termination methods
    for several CPSM subcomponents were updated to avoid abends due
    to unavailable structures when a CMAS terminates because of an
    exception during initialization.
    

Temporary fix

  •             *********
                * HIPER *
                *********
    FIX AVAILABLE BY PTF ONLY
    

Comments

  •    You observe resources missing from
    the CMAS's data repository, and incon-
    sistent BAS definitions stored in the
    repository while DFHLOG in the CMAS
    is defined as TYPE=DUMMY.
    
    
       CPSM requires that the EYUDREP file be recoverable, so that
    incomplete changes can be backed out if a repository update
    fails or an exception occurs during processing associated with
    a repository update (for example, BAS Inconsistent Set or
    Inconsistent Scope checking).  Otherwise, the repository may
    be updated with invalid resources, or resources may be deleted
    without any audit trail.  At one time module EYU0XDIN (XDIN -
    Data Repository Initialization) checked to insure that DFHLOG
    was not associated with a dummy logstream, but this check was
    bypassed during development of a prior release of CPSM so that
    CMASes could run on processors which did not support the MVS
    logger.
    
    
       The check to insure that DFHLOG is not associated with a
    dummy logstream is restored.  In addition, termination methods
    for several CPSM subcomponents were updated to avoid abends due
    to unavailable structures when a CMAS terminates because of an
    exception during initialization.
    

APAR Information

  • APAR number

    PK61294

  • Reported component name

    CICSTS V3 Z/OS

  • Reported component ID

    5655M1500

  • Reported release

    50M

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    YesHIPER

  • Special Attention

    NoSpecatt

  • Submitted date

    2008-02-20

  • Closed date

    2008-04-29

  • Last modified date

    2008-05-02

  • APAR is sysrouted FROM one or more of the following:

    PK61321

  • APAR is sysrouted TO one or more of the following:

    UK35928

Modules/Macros

  •    DYU0MOXT EYU0CITM EYU0MOXT EYU0PTRM EYU0TSTM
    EYU0WTRM EYU0XDIN EYU0XLBV EYU9XLEV
    

Fix information

  • Fixed component name

    CICSTS V3 Z/OS

  • Fixed component ID

    5655M1500

Applicable component levels

  • R50M PSY UK35928

       UP08/05/01 P F804

Fix is available

  • Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SSGMGV","label":"CICS Transaction Server"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"3.2","Edition":"","Line of Business":{"code":"LOB35","label":"Mainframe SW"}},{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG19M","label":"APARs - z\/OS environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"3.2","Edition":"","Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
02 May 2008