PM13554: EYUXD0017E DATA REPOSITORY RECORDS APPEAR CORRUPTED. CMAS RECENTLY UPGRADED TO 4.1. BAS ADMINISTRATION BEING DONE.

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• You upgrade your MP CMAS to CICS TS 4.1.  Your other CMASes are
  still pre-4.1.  You use the WUI or CICS Explorer administration
  to add new BAS resource definitions for entities that are new
  for CICS 4.1, such as an MQCONDEF.
  
  You then upgrade your non-MP CMAS to CICS TS 4.1, and the region
  initializes properly.  At some point you begin to use the WUI to
  make changes to the BAS resource definitions that were new to
  4.1.  At that point, your non-MP CMAS produces an SVC dump with
  a title similar to the following:
  
  TITLE=EYU0XZPT
  Dump,CMASNAME,applid,sysid,CMAS,XLST,tasknum,TRAC,
        EYU0XDRS,dd/mm/yyyy,hh:mm:ss
  
  and a message appears in your job log:
  
  EYUXD0017E CMASxx The data repository records for CICSplex
  (yourplex) appear to be corrupted.  Resyncronization with the
  Maintenance Point CMAS (MPCMASname) is required.
  
  In the trace from the dump, you see trace records from method
  XDRS with debug text DRBCXCP and Point-Id of 58, meaning
  BAD_RECORD.  You also see a trace entry out of XDRS with debug
  text of DRBCXCP and Point-Id of 59 which means REQ_REM_ADD.
  
  Additional Keywords:  KIXREVRBD
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: All CICSPlex SM V4R1M0 Users                 *
  ****************************************************************
  * PROBLEM DESCRIPTION:    You upgrade your MP CMAS to CICS TS  *
  *                      V4.1.  Your other CMASes still execute  *
  *                      an earlier release.  You use the WUI    *
  *                      or CICS Explorer administration to add  *
  *                      new BAS resource definitions for CICS   *
  *                      resources that are new for CICS V4.1,   *
  *                      such as an MQCONDEF.                    *
  *                      .                                       *
  *                         You upgrade your non-MP CMAS to CICS *
  *                      TS V4.1, and the CMAS initializes pro-  *
  *                      perly.  You then use the WUI to add an  *
  *                      association for one of the BAS resource *
  *                      definitions that was new to V4.1.  At   *
  *                      that point, your non-MP CMAS produces   *
  *                      an SVC dump with a title similar to the *
  *                      following:                              *
  *                      .                                       *
  *                      TITLE=EYU0XZPT                          *
  *                           Dump,cmasname,applid,sysid,CMAS,   *
  *                           taskid,tasknum,TRAC,EYU0XDRS,      *
  *                           dd/mm/yyyy,hh:mm:ss                *
  *                      .                                       *
  *                      and a message appears in your job log:  *
  *                      .                                       *
  *                      EYUXD0017E  The data repository records *
  *                           for CICSplex (yourplex) appear to  *
  *                           be corrupted. Resyncronization     *
  *                           with the Maintenance Point CMAS    *
  *                           (mpcmasname) is required.          *
  ****************************************************************
  * RECOMMENDATION: After applying the PTF that resolves this    *
  *                 APAR, all CMASes must be recycled to pick    *
  *                 up the new code.  Note that the restarts     *
  *                 do not need to be done at the same time.     *
  ****************************************************************
     When a resource is created in the Maintenance Point CMAS's
  data repository, synchronization records are sent to all non-MP
  CMASes to add the resource to each CMASes repository.  If the
  resource type is not known at the support level of the non-MP
  CMAS, the record is ignored.  When the repository is upgraded
  to the release of the Maintenance Point, these records cannot
  be restored.  If an association resource is created for a re-
  source which does not exist in the non-MP CMAS's repository
  (for example, an MQCINGRP resource for an MQCONDEF), message
  EYUXD0017E will be issued when the base resource (the MQCONDEF)
  is not found.  A flag will be set in the CPLXCMAS record which
  associates the CMAS with the context CICSplex, which will cause
  the CMAS to be removed from and reassociated with the CICSplex
  the next time the CMAS connects to the Maintenance Point.  This
  will refresh all resource definitions belonging to the CICSplex
  in the non-MP CMAS's data repository.
  

Problem conclusion

•    Module EYU0XDRS (XDRS - Data Repository Upgrade) was modified
  to set a flag in the CPLXCMAS record if an unknown resource type
  is skipped during a repository upgrade.  Module EYU9XDU2 (XDU2 -
  Data Repository Upgrade Patch Utility) was modified to set the
  flags to force a CICSplex remove and reassociate action, and to
  issue new message EYUXD0716W, if one or more resources were
  skipped in XDRS.  During a data repository downgrade operation,
  the flag will be set indicating that records were skipped during
  the downgrade process, so that the repository can be refreshed
  when it is next upgraded.
  

Temporary fix

• FIX AVAILABLE BY PTF ONLY
  

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UK58439

Modules/Macros

•    CPLXCMAS EYUA2737 EYUC2737 EYUE2737 EYUL2737
  EYUP2737 EYUQXDU2 EYURXDEQ EYURXDU2 EYUR2737 EYUTRDAT EYUT2737
  EYUYXDU2 EYUY2737 EYUZXDU2 EYU0XDIP EYU0XDRS EYU9XDPU EYU9XDP3
  EYU9XDP4 EYU9XDP6 EYU9XDU1 EYU9XDU2
  

Fix information

• Fixed component name

  CICS TS Z/OS V4

• Fixed component ID

  5655S9700

Applicable component levels

• R60M PSY UK58439

     UP10/07/06 P F007

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.