PK68625: EYUXD0027E MAL BAGN CAN NOT BE TRANSFORMED. METADATA NOT AVAILABLE.

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• The following message may appear in the MP CMAS EYULOG
  .
  +EYUXD0027E MAL BAGN can not be transformed.   Metadata not
              available.
  .
  The following exception trace entries may be seen in the MP CMAS
  trace dataset:
  .
  TASK:##### METHOD:MOX2 PRIOR:MOXS DEBUG:META_MAL POINTID:  3
  TRANID:LNMI
    MAJOBJ:DAT    ENVRN:CMAS  TYPE:EXCEPTION
    UOW(CPSM):    SYSTM:xxxx  NAME:yyyyyyyy   CICS-TASK:  #####
    MethName  MOX2,MOXS,CTSK,CTRD,CLMU,CLMT,XLOP
  .
   MAL        LEN:000040     ALET:00000000 ADDR:2DDE828C
       EYUQMOX2 IN
          *FUN FUNCTION( PERFORM_MAL_ANALYSIS )
          *CHR DEBUG( MOXSMOX2 )
          *ETK CAPABILITY_TOKEN( 00015B0000270002 )
          *PTR MAL_PREFIX( 2D601D38 )
          *ENM MAL_DIRECTION( INBOUND )
          *FUN TRANSFORM_FUNCTION( INITIATING )
          *LID MAL_LIST( 000020D80040E040 )
          *LID FIELD_LIST( 000020D80040E0C0 )
       OUT
          *RSP RESPONSE( OK )
          *RSN REASON( *              )
  .
  TASK:##### METHOD:MOX2 PRIOR:MOXS DEBUG:META_MAL POINTID: 3
  TRANID:XLST
    MAJOBJ:DAT    ENVRN:CMAS  TYPE:EXCEPTION
    UOW(CPSM):    SYSTM:xxxx  NAME:yyyyyyyy   CICS-TASK: #####
    MethName  MOX2,MOXS,CTSP,CAMR,XLST,XLOP
  .
  MAL        LEN:000040     ALET:00000000 ADDR:2DC79D84
      EYUQMOX2 IN
         *FUN FUNCTION( PERFORM_MAL_ANALYSIS )
         *CHR DEBUG( MOXSMOX2 )
         *ETK CAPABILITY_TOKEN( 00015B0000270002 )
         *PTR MAL_PREFIX( 2D601D38 )
         *ENM MAL_DIRECTION( OUTBOUND )
         *FUN TRANSFORM_FUNCTION( COMPLETING )
         *LID MAL_LIST( 000020D80040E040 )
         *LID FIELD_LIST( 000020D80040E0C0 )
      OUT
         *RSP RESPONSE( OK )
         *RSN REASON( *              )
  Additional Symptom(s) Search Keyword(s)
  EYU0BAGN KIXREVRBD
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: All CICSPlex/SM V3R1M0 Users                 *
  ****************************************************************
  * PROBLEM DESCRIPTION:    You have a plex in which the Maint-  *
  *                      enance Point CMAS is at a higher re-    *
  *                      lease or maintenance level than one or  *
  *                      more non-MP CMASes.  From a WUI server  *
  *                      connected to a CMAS at a lower service  *
  *                      level than the MP CMAS, you request a   *
  *                      display of CICS resource definitions in *
  *                      resource groups (the EYUSTARTRESINGRP   *
  *                      view set).  Message                     *
  *                                                              *
  *                        EYUXD0027E  MAL BAGN can not be       *
  *                                    transformed. Metadata     *
  *                                    not available.            *
  *                                                              *
  *                      appears twice in the CMAS job log.      *
  ****************************************************************
  * RECOMMENDATION:    After applying the fix for this APAR,     *
  *                 the Maintenance Point CMAS for a plex        *
  *                 must be restarted with the updated code.     *
  *                 Once the Maintenance Point has been re-      *
  *                 started, then any non-Maintenance Point      *
  *                 CMASes may be recycled to pick up the        *
  *                 changes.  Note that the restarts do not      *
  *                 need to occur at the same time.              *
  ****************************************************************
     When a request is shipped between CMASes that are not running
  the same release or maintenance level, it is the responsibility
  of the higher level CMAS to determine if the data being shipped
  needs to be converted so that it is in the format required by
  the receiving CMAS.  To do this, the higher level CMAS uses the
  metadata for the request's parameter list (MAL - message argu-
  ment list).  If the metadata is not defined properly, message
  EYUXD0027E is issued and no conversion takes place.
     MAL EYUZBAGN is shipped to the Maintenance Point CMAS when a
  request for CICS resource definitions in resource groups
  (RESINGRPs) is issued.  The metadata for EYUZBAGN is incomplete.
  As a result the Maintenance Point CMAS will not be able to con-
  vert the returned data to the level of the requesting CMAS, and
  the message described above will be issued.
  

Problem conclusion

•    EYUZBAGN has been updated to include the proper metadata to
  allow conversion to take place when the MAL is shipped between
  CMASes at different release or maintenance levels.
  

Temporary fix

• FIX AVAILABLE BY PTF ONLY
  

Comments

•    You have a plex in which the Maint-
  enance Point CMAS is at a higher re-
  lease or maintenance level than one or
  more non-MP CMASes.  From a WUI server
  connected to a CMAS at a lower service
  level than the MP CMAS, you request a
  display of CICS resource definitions in
  resource groups (the EYUSTARTRESINGRP
  view set).  Message
  
    EYUXD0027E  MAL BAGN can not be
                transformed. Metadata
                not available.
  
  appears twice in the CMAS job log.
  
  
     When a request is shipped between CMASes that are not running
  the same release or maintenance level, it is the responsibility
  of the higher level CMAS to determine if the data being shipped
  needs to be converted so that it is in the format required by
  the receiving CMAS.  To do this, the higher level CMAS uses the
  metadata for the request's parameter list (MAL - message argu-
  ment list).  If the metadata is not defined properly, message
  EYUXD0027E is issued and no conversion takes place.
     MAL EYUZBAGN is shipped to the Maintenance Point CMAS when a
  request for CICS resource definitions in resource groups
  (RESINGRPs) is issued.  The metadata for EYUZBAGN is incomplete.
  As a result the Maintenance Point CMAS will not be able to con-
  vert the returned data to the level of the requesting CMAS, and
  the message described above will be issued.
  
  
     EYUZBAGN has been updated to include the proper metadata to
  allow conversion to take place when the MAL is shipped between
  CMASes of different release or maintenance levels.
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  PK68594 UK38447

Modules/Macros

•    EYUQBAGN EYURBAGN EYUTRBAS EYUYBAGN EYUZBAGN
  EYU9BAPU EYU9BAP3 EYU9BAP4 EYU9BAP5
  

Fix information

• Fixed component name

  CPSM CICS 3.1

• Fixed component ID

  5655M1501

Applicable component levels

• R100 PSY UK38447

     UP08/07/29 P F807

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.