PM17552: JCYMIG00 IS GENERATING SYSIN DD * WHEN IT SHOULD NOT.

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• This APAR is for 4 differents PMRs:
  - 19245,999,000
    ============================================================
    Date reported: 05/15/2010
  
    Severity: low
  
    Users Affected:
      IMU users of Parallel testing Utility
  
    Problem Description:
      JCYMIG00 is generating SYSIN DD * when it should not.
  
    Problem Summation
      FSYMIG00 program does not properly filter out non Easytrieve
      Plus SYSIN data.
  
    Problem Conclusion:
      FSYMIG00 was changed to recognize when encountered "SYSIN
      DD*" is an EZT Plus SYSIN.
  
    Note: This problem was reported by IBM consultants.
    ==========================================================
  
  
  - 19248,999,000
    =========================================================
    Date reported: 05/15/2010
  
    Severity: low
  
    Users Affected:
      IMU users of Parallel testing Utility
  
    Problem Description:
      Parameters on the EXEC statement are not scanned to
      column 72.
  
    Problem Summation
      A bug in  FSYMIG00 uses a wrong loop counter.
  
    Problem Conclusion:
      FSYMIG00 was corrected to scan parameters up to and
      including cc 72.
  
    Note: This problem was reported by IBM consultants.
    =========================================================
  
  - 19250,999,000
    ==========================================================
    Date reported: 05/15/2010
  
  
    Severity: low
  
    Users Affected:
      IMU users of Parallel testing Utility
  
    Problem Description:
      FSYMIG00/FSYMIGS0 does not pass on AVGREC parameter if
      placed after another statement on a JCL statement.
  
    Problem Summation:
      Logic in FSYMIGS0 does not recognize the AVGREC= if placed
      following another parameter.
  
    Problem Conclusion:
      FSYMIGS0 was changed to preserve the AVGREC= parameter.
  
    Note: This problem was reported by IBM consultants.
    ==========================================================
  
  - 19253,999,000
    ==========================================================
    Date reported: 05/15/2010
  
    Severity: low
  
    Users Affected:
      IMU users of Parallel testing Utility
  
    Problem Description:
      GDG allocation is failing in the compare step.
  
    Problem Summation:
      A full GDG name is extracted by FSYMIG10/FSYMIG11 and
      FSYMIG20 along with the GDG number.  Since the GDG name
      reflects the current generation, the GDG number is
      not needed and is causing allocation problems.
  
    Problem Conclusion:
      FSYMIG10/FSYMIG11 and FSYMIG20 were changed to clear the
      unneeded GDG number, eliminating allocation problems.
  
    Note: This problem was reported by IBM consultants.
  
  ===============================================================
  

Local fix

• N/A
  

Problem summary

• ****************************************************************
  * USERS AFFECTED: IMU V3.20 users of Parallel testing Utility. *
  ****************************************************************
  * PROBLEM DESCRIPTION: This APAR addresses several problems.   *
  *                                                              *
  *                      1. JCYMIG00 is generating SYSIN DD *    *
  *                      when it should not                      *
  *                                                              *
  *                      2. Correct scan area on EXEC statement  *
  *                      from CC64 to CC72.                      *
  *                                                              *
  *                      3. Preserve AVGREC= parameters in JCL   *
  *                      when coded after another parameter      *
  *                                                              *
  *                      4. Correct dynamic allocation of GDG    *
  *                      files in the Parallel Test COMPARE run  *
  ****************************************************************
  * RECOMMENDATION:                                              *
  ****************************************************************
  FSYMIG00 program does not properly filter out non Easytrieve
  Plus SYSIN data.
  

Problem conclusion

• FSYMIG00 was changed to recognize when encountered "SYSIN
  DD*" is an EZT Plus SYSIN.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FSYMIGS0 FSYMIG00 FSYMIG10 FSYMIG11 FSYMIG20
  

Fix information

• Fixed component name

  MIGRATION UTILI

• Fixed component ID

  5697N4400

Applicable component levels

• R320 PSY UK60387

     UP10/09/14 P F009

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.